Showing posts with label Torsion Spring. Show all posts
Showing posts with label Torsion Spring. Show all posts

Saturday, July 4, 2020

Can you Repair a Rotten Wooden Garage Door Section?


While wooden garage doors look beautiful and elegant when you maintain them well, these doors are also more susceptible to changing weather conditions and inclement weather that is likely to wreak havoc on these smooth wood panels.

However, if you notice any water damage, bowing, rotting, or other problems with your wooden garage door panels, do not worry. The good news is that you can easily repair wood rot damage to wooden doors in order to restore your door to a better condition. 

Take these steps to repair your wooden garage door without ordering a costly replacement door.
1.      You should cut out the quarter round carefully on the inside of your garage door. You can do it by scoring it repeatedly using a utility knife. You can also use an oscillating tool for this purpose.
2.      When you have removed the quarter round from the borders on the interior side of the door panel, you can easily knock out the panel using a hammer. You should hammer from exterior to the interior as you didn’t remove this quarter round from the exterior.
3.      Once you have identified rot in the door, the next step is to get rid of all the affected wood. You only have to cut out the rotted section of the wooden garage door.
4.      When you have removed the panel, you may take a chisel in order to smooth and tidy the area where this panel was installed.
5.      Now, apply one coat of a wood hardener to the area that you smoothed before the installation of the new panel. Note that this step is important as it will protect your wooden garage door from water penetration and prevent rot.
6.      If you have to cut the new panel, you can cut it to size using a circular saw or table saw. On the other hand, you may have it cut to size when you buy it to eliminate this step.
7.      Now it is time to prime and paint the new piece of the wood panel. The next step is to fit this new piece of panel inside the hole. You can use caulk and some finish nails in order to attach your quarter round back and secure it firmly in place.
8.      You can caulk around the exterior sides of the panel for more protection.

You can use the above steps to repair your rotten garage door section. You may also hire a professional service, like Thrifty Garage Door Repair Calgary, for more information or to do this job for you.


Wednesday, May 27, 2020

Garage Door Spring Repair Calgary


Thrifty Garage Door Repair Calgary offers torsion and extension springs service in Calgary and surrounding areas. Any problem with your residential garage spring system will be fixed in no time by our technicians. Our professionals Garage Door techs can fix any type of home, garage spring and carry the right tools and parts for fast, accurate and effective job. We provide the best service in Calgary AB and surrounding areas. We look forward to serving you. Give us a call at 587-200-9101 or emails us at info@thriftygaragedoorrepaircalgary.ca now.

                         


Monday, April 20, 2020

Why is Garage Door Spring Repair Not A DIY Job?


It shouldn't be a surprise that maintaining and replacing your home appliances is always an on-going procedure. It doesn't matter whether you plan to do-it-yourself or plan to hire a professional for the same task - at the end of the day, you would want your job finished in the most effortless and cost-efficient way possible.

But sometimes, as a homeowner, you need to be realistic about your tool inventory and skills. Even though garage door hardware and replacement parts can be found at some home improvement stores, it doesn't mean that you should consider handling a job like these on your own. When it comes to springs, you better leave it to the professionals such as garage door spring repair in Calgary and get it done on the same day in the safest manner and without any concerns about missing tools and parts.

The Reasons Why Repairing A Garage Door Spring Is Only To Be Performed By A Professional Garage Door Technician

1. Not Making The Situation Worse By Going For Garage Door Spring Repair Services
One of the very first reasons why you should stop trying to repair your garage door all by yourself is the inherent possibility of making things worse in the process. The task of a torsion spring replacement requires experience; inexperienced homeowners can make things worse and damage the garage door.

There are times when affordable and straightforward repairs have been turned into a complicated and costly affair, just because homeowners planned to perform DIY repair on their garage doors. It should clear that repairing garage doors is such a job that most people cannot pull-off unless they have a clear understanding of the underlying mechanics and how garage door mechanism work. This is the reason why opting for Thrifty Garage Door Calgary services is always the safest available option out there.

2. Not Having The Right Tools
Part of the reason why most homeowners cause costly damages to their garages is that they try to repair it themselves without having the required tools needed to complete the task.
Doing the repairs without the necessary tools can further lead to increased damage to the garage door, as well as damage to your tools. There's no denying that repairing a garage door is always a dangerous procedure. When you start adding wrong tools to the mix, the risks increase, which is why hiring a garage door spring repair in Calgary service is crucial.

3. Being Reckless  With The Spring Systems
It should be known that most garage doors out there operate with a counterbalance system, such as torsion or extension systems. On the flip side, these spring systems can be extremely dangerous primarily when dealt with inexperienced hands.

The reason is that these torsion spring systems are horizontally mounted. If the spring breaks during the repair process, it can easily send numerous broken pieces and tools in every direction and thereby putting the people and vehicle at risk. Times like these are when you need to hire a professional that provides garage door repair services. Learn more at https://thriftygaragedoorrepaircalgary.ca/.

Tuesday, March 10, 2020

Garage Door Torsion Spring – How Is It Works


Torsion springs play a vital part every time you close or open your garage door. Here is what you should know about torsion springs.
How It works?
Torsion springs are similar to other springs only the work a bit differently. They wind and unwind unlike to extension spring, which stretches and retract to their normal position. the benefit to torsion to other garage door springs is in safety and longevity
What does torsion spring do?
Torsion springs are usually horizontally mounted on top of your garage door. When you pull down the door, cables affixed to the base corners actually push the twist the cables drums to wind & then their energy counterbalances the weight of the garage door, making it easy to lift up & easy to open.
Lifecycle and tension ratings:
As the garage door is closed and opened over time, the coil in the torsion spring will develop metal fatigue and eventually break most springs are rated at 10,000 cycles. on average a homeowner would use the garage door for 4 cycles a day with the use they should last about 5-7 years
we provide a higher cycle spring of about 13-15 thousand we can also provide custom high cycle springs
Dangers & risks:
An overhead door with a broken spring can slam & cause severe injury and even death. However, the most typical risk comes when the spring breaks down and the homeowner decides on DIY. Torsion spring replacment in garage doors can be dangerous, and you not just require the precise tools and parts to accomplish the job, but also should have good knowledge about the understanding on how a garage doors works and the mechanics involved in it. Some DIY repairs in repairing garage doors can be extremely dengeours, therefore need to be handled with accuracy, which is why it is recommended to hire a professional for your garage door spring repair in Calgary.

Unless you have experience & the correct tools, it's essential that you look for a specialist who specializes in a broken spring repair in Calgary. And for this, you can always rely on garage door specialists like Thrifty Garage Door Repair Calgary. Whether it is a broken spring repair or complete garage door replacement, you can trust our workmanship. For any help, you can reach us at 587-200-9101. We service Calgary and Airdrie.